1981 VDS Lola

Home  /  1981 VDS Lola

< Go Back to Sold Cars

This vehicle has been sold. View our available inventory here.

VDS 003 History & Info

This VDS 003 is disassembled and it includes the entire remaining inventory. These components were purchased and preserved to be able to assemble the VDS 003 car that was damaged at Lime Rock in 1983 during the Dallas Motorsport race season. The original log book, photos, and documentation are included in this package. The inventory file list consists of:

  1. Blue print, Technical drawing and Template Inventory
  2. Manufacturing Jigs and Tooling Inventory
  3. Bodywork Mold and Buck Inventory
  4. VDS 001/002/003/004 Parts Inventory
  5. Lola T530/T532 Parts Inventory

The VDS 003 car was sorted and tested at Rattlesnake Raceway in Midland, TX in 1982 and 1983. In 1983 at Limerock, CT, Phil Compton crested the hill and the car caught air and flipped. He said that he had just shifted into fifth gear and the car got light at the top of the hill. The incident occurred at the end of the practice session at the first race the car was ever entered in. The damaged car was returned to the shop in Dallas, TX where it was disassembled and the parts were placed in storage. At that time Don Schnieders was the crew chief and he decided that the tub was un-useable so the chassis was disassembled completely. The salvageable components from the tub were stored.

The bodywork can be created from the original molds, which are included.

The motor is not included, but the original engine block is included.

The gear box needs to be completed, and the following parts are required but not included:  Hewland DG300: Main case #DG201, Selector finger housing #DG203, Selector fork 1st/Rev #DG249, Selector fork 4th/5th #FT251, Selector finger #FT252, Diff plunger carrier #DG214-L/S

In addition, the Lola T530 chassis tub (which is brand new) needs to be slightly modified to clear VDS center nose area.

Cradle assembly mount needs to be fabricated for the rear suspension (blue print #RSC-300).

Electrical wiring, hardware, battery, radiator hoses, tires, or fluids are not included. However, there are diagrams and a complete list of hardware is included.

 

Invalid Displayed Gallery

All the parts that are included with the car are listed below.

Body/Chassis/Wing

  • 1 each Undertray w/camlocks, front, new, honeycomb
  • 8 each Radiator mounting plates, lightened
  • Assort Misc. brackets/templates for nose frame, rocker arm pivots, venturi supports, 530 engine frame, brace mounts, triangulation brackets
  • 1 box Assortment of triangulated rear transmission plate support tubes
  •  2 each Rear tire door hinges with camlock receptacles, new
  •  2 each Rear tire door hinges, new
  •  Assort Oil cooler and side pod mounting brackets
  •  5 each Heat dissipation plates, stainless steel
  •  1 pair Oil cooler tray Gurney lips
  •  1 pair Original rear exhaust honey comb panels
  •  2 each Oil cooler mounting plates, aluminum
  •  2 each Oil cooler square carriers, aluminum
  •  2 each Radiator supports with stationary nuts, aluminum
  •  2 each Radiator ducting panels, bent & drilled, aluminum
  •  2 each Radiator exit panels, curved, riveted, aluminum, R&L, #003
  •  1 each Engine bottom panel with NACA duct for starter motor, #003
  •  2 each Side pod supports, front, honeycomb
  •  1 each Engine mounting bracket, aluminum, (experimental)
  •  2 each Mounting plates that bolt to water pump
  •  1 each Wing, rear
  •  Assort Wing components – rubbing blocks, mounting fixtures, and washers
  •  3 each Wing adjustment links
  •  2 each Wing links of different sizes
  •  2 pairs Wing mounting plates, + template
  •  1 each Wing mounting plate assembly
  •  3 each Wing to duct, rear engine duct supports
  •  1 each Engine mounting plate – original with shifter shaft spherical joint mount
  •  1 each Transmission upper X brace
  •  2each Rear transmission plates
  •  1 each Rear sway bar plate
  •  2 each Intermediate rear sway bar plates
  •  4 each Front rocker arm mounting plates
  •  2 each Rear engine to chassis support bars
  • 1 each Transmission to chassis support bar w/heim joints
  •  2 each Rear chassis bulk head X braces
  •  2 each Rear chassis bulk head X brace studs
  •  Assort X brace tubing components, awaiting final assembly
  •  1 each Front nose mounting bracket
  •  2 each Kevlar under tray panels for front suspension, early style
  •  2 each Rear body exhaust shields, corrugated stainless steel
  •  1 each Exhaust shield, bent/curved, mounts to honeycomb, original
  •  1 each Kevlar aluminum backed glue on type shielding
  •  4 each Locating rods for honeycomb side pod support structure
  •  1 each Oil cooler panel, aluminum
  •  1 each Transmission bottom mounting plate
  •  2 each Radiator mounting panels, aluminum
  •  1 each Bracket, aluminum
  •  1 each Intermediate transmission plate
  •  2 each Support rods for side pods
  •  2 each Battery boxes
  •  3 each Side pod support brackets
  •  2 each Radius panels for front of side pods
  •  1 each Transmission oil cooler duct, rear, aluminum
  •  1 each Splitter, aluminum, used
  •  1 each NACA duct, 7”x13”, needs trimming, new
  •  1 each Nose reinforcement panel for bodywork, new
  •  1 set Kevlar tub ducting panels, R&L, used
  •  1 set Brake duct inlet assembly, R&L, Kevlar, used
  •  1 each Bodywork reinforcement rib, carbon fiber, new
  •  2 sets Side skirts, Kevlar
  •  1 each Splitter, Kevlar, untrimmed
  •  2 each Side pad repair panel, front
  •  1 each Inner wheel well panel, right rear, Kevlar
  •  2 sets Radiator outlets, center body, used
  •  1 each Seat, used
  •  6 each Rear wheel covers, 3 Kevlar, 3 honeycomb, used
  •  1 pair Tail extensions, Kevlar, R&L , (prototype)

Suspension/Steering:

  • 1 box Torington rollers, spacers and roller bearings for front rocker arm system
  •  1 each A-arm triangulation support, front, nickel plated
  •  Assort Aluminum, brass, Delrin spacers for lower front A-arm adjust
  •  10 each Wheel drive pins, new
  •  Assort Wheel drive pins, used
  •  7 each Shock mounting eyes, front
  •  2 each Shock mounting eyes w/spherical joints, rear
  •  4 each Wheel bearings and races, front
  •  Assort Wheel bearing races and seals
  •  1 each Trunnion, front suspension
  •  1 each Stud for rear suspension Heim joint
  •  22 pairs Shock coil springs: 1400#, 1700#, 2100#, 2136#, 2150#, 2600#, 2750#, 3000#(x2), 3500#(x2), 3700#(x2), 3800#, 4000#, 4200#(x2), 4250#(x2), 4500#(x2), 5000#
  •  4 each Coil spring tensioners
  •  1 each Torrington cam thrust button
  •  Assort Steering ball joints
  •  Assort Suspension bushings
  •  2 each Rear camber links
  •  1 each Rear camber link, updated
  •  4 each Rear camber links, black anodized
  •  3 pair Roller trunnion, front – 2 different styles
  •  1 each Pivot shaft, front
  •  2 each Steering shaft links
  •  3 each Steering shaft links, black anodized
  •  1 each Triangulation arm, front suspension, nickel plated
  •  2 each Hexagonal slotted locating bolts for top of front suspension, long
  •  3 each Steering link mounting brackets
  •  4 each Steering link mounting plates, magnesium
  •  8 each Ring mounting clevises, steering
  •  2 each Threaded shafts for front rocker arms
  •  3 each Threaded shafts for rear rocker arms
  •  3 each Steering shaft pivot balls
  •  3 each Steering shaft pivot ball hexagonal locking covers
  •  Assort Shock, CV, Suspension parts – brass spacers, aluminum brackets for shock mounts, steel machined bushing inserts for engine & transmission plates
  •  2 each Uprights with hub, front, magnesium
  •  2 each Uprights, rear, complete with hub assemblies, fabricated
  •  1 each Upright, rear, fabricated, damaged
  •  2 each Uprights, front, complete with hub assemblies, fabricated
  • 6 each Upright dowels, press in
  •  2 each Upright pivots, bolt in
  •  1 each Hub, rear, w/bearing and locating drive pins
  •  8 each Hub spacers, rear
  •  7 each Hub spacers, front
  •  2 each Compression washers for hubs, nickel plated
  •  Assort Shock adjustment screws
  •  Assort Shock spring spacers
  •  Assort Shock spring pots
  •  Assort Top shock adjustment and mounting components
  •  2 each Steering wheels with shafts, adjustable, one w/u-joint
  •  1 each Steering rack, VDS #003 (engraved)
  •  Assort Steering rack parts & shims
  •  Assort Steering shaft components, two primary steering shafts, one quick release shaft with bushings and pivot balls
  •  4 each Koni shocks, #8212, aluminum, 3 long, 1 short
  •  2 each Koni shocks w/remote reservoirs, #8212 sort
  •  2 each Koni shocks w/remote reservoirs, #8212 long
  •  1 set Suspension arms, front, upper
  • 1 set Suspension arms, front, lower
  •  3 each Suspension arms, front, upper (spares)
  •  1 set Suspension arms, rear, upper
  •  1 set Suspension arms, rear, lower
  •  1 each Suspension arm, rear, upper (spare)
  •  1 each Suspension arm, rear, lower (spare)
  •  1 each Suspension arm, lower, #003, (damaged)
  •  1 each Suspension arm, upper, #003, (damaged)
  •  1 each Sway bar, rear – 2” x .065”
  •  1 each Sway bar, rear, (experimental), designed for blade type lengths
  •  2 sets Sway bar plastic bushings, rear
  •  Assort Sway bar aluminum mount brackets & Delrin pivot bushings
  •  Assort Torrington washers for front suspension
  •  Assort Torrington wheel bearings, sway bar, and front suspension components

Wheels:

  • 1 set BBS front wheels, 15”x11”, complete, used
  •  2 set Jongbloed rear wheels, 15”x17”, complete, used
  •  2 each 15”x9” inner wheel
  •  2 each 15”x8 ½” inner wheel
  •  4 each 15”x8” inner wheel
  •  1 each 15”x7 ½” inner wheel
  •  1 each 15”x8” outer wheel
  •  1 each 15”x6” outer wheel
  •  1 each 15”x2 ¾” outer wheel
  •  2 each 15”x2 ½” outer wheel
  •  1 each 15”x1 ½” outer wheel
  •  2 each Jongbloed wheel centers
  •  5 each Wheel nuts, used
  •  4 each Wheel nuts, gold anodized, new

Brakes:

  • 1 each Aluminum tank for water brakes
  •  1 each Water brake sender with brass fitting
  •  1 each Aluminum box to retain plastic jug for water brakes
  •  3 each Reservoirs with caps
  •  3 each Lockheed 7/8” master cylinders for remote reservoirs
  •  2 each Lockheed 5/8” master cylinder for remote reservoir
  •  1 each Brake bias assembly with rods and spherical joint for pedal housing
  •  1 each Brake bias assembly, heavy duty
  •  16 each Caliper pistons, used
  •  1 each End screw cover
  •  16 each Brake pads, front, DS11, thick style
  •  8 each Brake pads, rear, 2430
  •  16 each Brake pads, front, Mantex 1718, normal thickness
  •  8 each Brake pads, Ferodo 2459, extra thick
  •  8 each Brake pads, front, DS11
  •  2 each Lockheed CP2270 calipers, rear, complete
  •  4 each Lockheed CP2667 calipers, front
  •  4 each Lockheed CP2667 calipers with crossover tubes, front, #003
  •  1 pair Brake rotors, front, w/mounting bells
  •  1 pair Brake rotors, rear, w/aluminum mounting bells
  •  8 each Brake rotors, front, used
  •  5 each Brake rotors, rear, used
  •  8 each Brake rotors, rear, new, sphere cone
  •  1 each Brake rotor, new, standard vent
  •  8 each Brake pistons, chrome, short
  •  8 each Brake pistons, chrome, long
  •  1 set Rear caliper screw fittings for piston replacement
  •  1 set Brake pistons, titanium, used
  •  4 sets Brake pistons, titanium, new
  •  3 each Remote brake reservoirs
  •  7 each Brake bells/hats, 4 front, 3 rear
  •  4 each Caliper piston access nuts, rear
  •  Assort Brake ducts, front and rear, carbon/Kevlar
  •  8 each Brake duct mounting tabs, tear drop shaped
  •  10 each Brake duct mounting brackets, rear
  •  Assort Phenolic brake piston inserts
  •  3 each Rear brake caliper springs
  •  Assort Caliper seals
  •  Assort Brake piston pads

Fuel System:

  • 2 each Discriminator Valves – 1 new, 1 used
  •  9 each 90° elbows
  •  1 each Fuel Intake Flange, new
  •  1 each Center section for refueling flange
  •  1 each Alum & Mag bolt on receptacle for the fuel cells
  •  6 each Gulp valve receptacle hoses
  •  2 each One way fuel valves for bottom side of fuel cells
  •  2 each Flange tops for fuel cell mounting
  •  1 each Fuel cell cover – oval
  •  1 set Oval fuel cell securing tabs, tank to cell
  •  2 each Mag bottom flanges w/ steel threaded inserts, fuel cell
  •  1 each Fuel filter separator
  •  2 each Half moon shaped gulp valve tubes, aluminum
  •  2 each Large oval gold cad plated ATL fuel cell covers
  • 1 each ATL front vent gasket
  •  1 each O-Ring kit for ATL fuel bottles
  •  1 each Aluminum riser flange for fuel inlets
  •  2 each 18” sections of fuel hose for vent and dump bottles
  •  2 each Marston fuel bladders manufactured 3/80, short tub
  •  2 each ATL fuel bladders, manufactured 3/82, long tub #003
  •  1 each ATL bladder receptacle, 5” dia., magnesium w/gaskets
  •  2 each Shaw fuel caps
  •  1 each Fuel cooler
  •  2 each Electric fuel pump mounts, nickel plated, original
  •  1 each Fuel separator support box, welded aluminum
  •  Assort ATL fuel bladder mounting plate gaskets
  •  3 each Fuel return plates, new
  •  1 each 11 gallon refueling jug

Ignition:

  •  2 each Bosch spark boxes – 8cyl, with mounting plate, coil and electrical plugs, tested okay 1/86
  • Assort Crank trigger fire electrical components
  •  2 each Pick up coil boot with suppressor
  •  1 each Double magnet crank trigger, mounts next to harmonic balancer
  •  1 each Bosch ignition package mounting plate
  •  1 each Ignition magnetic pick up w/water pump mount

Cooling Systems:

  • 1 box Assorted aluminum tubes with bends and flow reducers for cooling system, thermostat flange unit
  •  1 each Radiator end plate and cap
  •  Assort Miscellaneous water tubes
  •  1 each Stainless steel swirl pot with bracket, original from #003, damaged
  •  1 each Support bracket for swirl pot
  •  1 each Thermostat housing, cast, with swirl pot bleeder
  •  2 each Stainless radiator screens
  •  1 each Modified radiator tube with insulation, aluminum
  •  5 each Aluminum water radiators
  •  2 each Brass water radiators
  •  2 each Radiator support brackets
  •  6 each Oil Coolers, old style
  •  2 each Oil cooler mounting brackets
  •  2 each Coolers, transmission, old style
  •  1 each Catch tank bracket, stainless steel
  •  1 each Catch tank, used

Engine/Oiling System/Exhaust:

  •  1 each Original VDS #180 Chevy Block, race machined, casting #A.064, main caps & Chaparral crankshaft.
  •  1 set Exhaust headers for #003, triangulated flanges, reinforced, with stainless steel megaphones
  •  2 each Exhaust mount brackets
  •  1 each Harmonic balancer chamfered, degreed 360°, w/sprags installed for crank trigger fire ignition system
  •  1 each McCay water pump, rebuilt with crank trigger fire mounting flange and cam float flange
  •  1 each Oil filter and screen canister
  •  1 each Oil tank bracket
  •  2 each Crank pilot bearings

Transmission/Drivetrain:

  • 4 each Spicer U-joints, new
  • 2 each U-joints
  • 1 each U-joint assembly with yokes
  • 1 each Yoke, hub side
  • 2 each Yoke, half shaft side
  • 3 each Splined yoke spuds
  • Assort Nylos ring hub seals
  • 3 each Hub flanges for CV joints
  • 8 each Half shafts, CV joint both ends
  • 6 each Half shafts, CV joint to U-joint style, 2 with CV’s attached
  • Assort Half shaft spacers
  • 1 pair Transmission side plates
  • 1 each Shift rod link from cockpit to engine bay
  • 4 each CV boots, low clearance style, new
  • 4 each CV end caps
  • Assort CV joint bolts
  •  2 each Input shafts – 1 @ 21 ¾” for long bell housing, 1 @ 18 ¾” for short bell housing
  • 1 each Differential carrier
  • 1 each DGZ shifter case, magnesium
  •  1 each End plate with wing mounts, magnesium
  • Assort Differential spiders
  • 1 each Pinion shaft bearing and cage assembly
  • 3 each Dogs, new
  • 3 each Dogs, used
  • 2 each Reverse gears, new
  • Assort Differential plates, flat & beveled
  • Assort Hub sliders
  •  1 each Transmission dog sliders, short
  •  2 each Transmission dog sliders, long
  •  3 each Shift forks
  •  1 each Oil return spigot
  •  1 each Reverse idler holder, roller bearing type
  •  1 pair Side plates, upgraded style
  •  2 each Output flanges
  •  2 each Ring and Pinion, 931
  •  1 each First gear, VGB 1836, new
  •  1 each First gear, 1838, new
  •  1 each Second gear, 1937
  •  1 each Second gear, 1936
  •  1 each Second gear, 2034
  •  1 each Top gear, 2531, new
  •  1 each Top gear, 2530, new
  •  1 each Top gear, 2233, new
  •  1 each Top gear, 2035, new
  •  1 each Top gear, 2034, new
  •  1 each Top gear, 2135, new
  •  1 each Top gear, 2234, new
  •  1 each Top gear, 2332, new
  •  1 each Top gear, 2133, new
  •  2 each Reverse gears
  •  1 each Side plate, right, DGZ
  •  2each Side plate, left, DGZ
  •  1 each Oil cooler spacer plate ¾”
  •  3 each Shaft bearings, small
  •  1 each Clutch rod limiter plate
  •  1 each Dog shift fork
  •  2 each Clutch rod , adjustable
  •  2 each Spacer, 4” & 5”
  •  2 each Nut, CWP

Clutch:

  • 2 each Clutch slave cylinders, 1 – 5/8”, 1 – ¾”
  •  Assort AP clutch components
  •  1 each Clutch bearing spigot
  •  1 each Adapter, aluminum
  •  1 each Throw out bearing pivot arm w/bolts, aluminum
  •  1 each Throw out bearing w/spacer
  •  1 each Clutch pivot ball, aluminum
  •  3 each Bell housings, magnesium, 2 – long style, 1 – short style

Electrical/Gauges/Cabling:

  • 2 each Mechanical tach cables
  •  3 each Morris throttle cables
  •  1 each Bracket for Morris throttle cable
  •  1 each Throttle linkage mounting bracket
  •  1 each Throttle cable bracket, aluminum
  •  Assort Throttle springs
  •  1 each Starter button
  •  1 each Low oil psi warning light
  •  2 each Rain lights
  •  2 each Dash panels
  •  1 each Smiths oil psi gauge
  •  1 each Smiths oil temp gauge
  •  1 each Smiths oil psi gauge, mechanical
  •  1 each VDO temp gauge, C°
  •  1 each VDO oil psi gauge, mech
  •  1 each VDO temp gauge, electric, F°
  •  1 each VDO psi gauge, electric
  •  1 each Cav Amp gauge
  •  2 each Contactless tachometers – electric
  •  2 each Tach drive reducers – 1 straight, 1 90°
  •  3 each Adapters
  •  1 each Fuel psi to oil psi diaphragm converter for fuel gauge
  •  2 each Tilton starters, 1 complete, 1 disassembled
  •  1 each Starter adapter plate, magnesium
  •  1 each Oil pressure warning light adapter fitting
  •  5 each VDO temperature senders
  •  1 each Master switch box

Misc:

  • 1 each Aluminum battery tray box, remote hand held jumper style
  •  5 each Side view mirrors, glass
  •  1 each Throttle pedal, aluminum, lightweight
  •  1 each Brake pedal
  •  1 each Brake pedal bracket
  •  4 each Clutch pedals
  •  2 each Foot pads, pedals
  •  1 each Dead pedal, left foot
  •  1 each Side mirror, used
  •  1 each Catch tank, #003, damaged
  •  Assort Misc. C-clips
  •  1 each VDS aluminum shift knob
  •  Assort Apex shift joints, suspension Heim joints, A-arm pivot studs, and spherical joints
  • 1 each Rollover hoop bend
  •  1 each Lifeline 10lb electrical fire system w/mounting strap
  •  2 sets Safety harnesses
  •  2 each Black vinyl cover pads for knee area in tub
  •  2 each Handles for battery tray boxes
  •  1 each Tire cover piano hinge, rear, #003
  •  1 each Cam latch panel w/cam latch
  •  3 each Brackets – 2 aluminum, 1 composite to cover the quick battery disconnect on right side of chassis
  •  Assort Honeycomb braces
  •  Assort Flat O-rings
  •  Assort Metric bolts and fasteners
  • Assort Hydraulic fittings
  •  Assort Shims & Bushings
  •  1 each NACA duct nose panel section (damaged)

Bodywork Mold & Buck Inventory

Nose Section:

  •  Nose mold (no radiator inlets)
  •  Nose buck (with radiator inlets)
  •  Inner front wheel well mold, left
  •  Inner front wheel well mold, right
  •  Inner rear wheel well mold, left
  •  Inner rear wheel well mold, right
  •  Center honeycomb reinforcement template
  •  Center Kevlar reinforcement template
  •  Splitter mold w/2 splitter templates
  • Radiator NACA duct inlet mold, right
  •  Radiator NACA duct inlet mold, left
  •  NACA duct mold, 5”x9”, contoured for nose

Center Section:

  •  Center body mold
  •  Plexiglass windscreen mold
  •  Side mirror cover mold, left
  •  Side mirror cover mold, right
  •  Radiator outlet mold, left
  • Radiator outlet mold, right
  • Camlock pocket mold, 2 pieces

Side Pod Section:

  • Side pod mold, left
  • Side pod mold, right
  • Side pod skirt, buck, left
  • Side pod skirt, buck, right
  • Side pod skirt, mold, left
  •  Side pod skirt, mold, right
  •  Side pod repair panel mold, front left, 2 pieces
  •  Side pod repair panel mold, front right, 2 pieces
  • Side pod repair panel mold, rear left, 2 pieces
  •  Side pod repair panel mold, rear right, 2 pieces
  •  Side Radiator inlet mold, right (#002 only)
  •  Side Radiator inlet mold, left (#002 only)
  •  Side pod trim flange mold, (left & right combined)

Rear Body Section:

  •  Rear body mold
  •  Snorkel buck
  •  Snorkel mold
  •  Velocity stack mold for snorkel base
  •  Inner rear wheel well mold, left
  •  Inner rear wheel well mold, right
  •  Tail extension mold, right, (prototype only)
  •  Tail extension mold, left, (prototype only)
  •  NACA duct mold, 2.5” x 7”

Misc. Molds & Bucks

  • Front brake caliper duct buck, left
  • Front brake caliper duct buck, right
  • Front brake caliper duct mold, left
  • Front brake caliper duct mold, right
  •  Front brake caliper duct inlet buck, left (damaged)
  • Front brake caliper duct inlet buck, right
  • Front brake caliper duct inlet mold, left
  • Front brake caliper duct inlet mold, right
  • NACA duct mold, 7”x13”
  • Ducting bucks, large, wood, x2
  • Aluminum & Composite molds for Kevlar rad/brake air ducting components, 11 pieces
  • Seat mold
  • Air inlet/outlet bucks, various shapes and sizes, x3

Blue Print, Tech Drawing & Template Inventory

Model Drawing # Description:

  • VDS-001 VDS-1007 Sketch Front Subframe
  •  VDS-001 VDS-1005 Gen Arr. – Front Stabilizer Bar
  •  VDS-001 VDS-1006 Bar – Front Stabilizer
  •  VDS-001 VDS-1002 IMFO Steering Arm
  •  VDS-001 VDS-1004 Brackets – Pedal
  •  VDS-001 VDS-1001 Steering Shaft
  •  VDS-001 VDS-1007 Mount – Front Shock Lower
  •  VDS RSP 200 Rear Lower Control Arm, R&L
  •  VDS – VDS 82 Fuel Pod (Left Hand) (mirror for right hand)
  • VDS DMI 1 2 Stage CanAm Wing to Suite VDS Mount
  • VDS RSC 300 Cradle Assy
  • VDS RSP 100 Rear Rocker Plate
  • VDS RSP100 Rear Rocker Plate (modified)
  •  VDS RRB 100-A Rear AntiRoll Bar Assy, Double Blade Assy
  •  VDS RSP 102 Front Rocker Plate (1/2)
  •  VDS RSP 102 Front Rocker Plate (1/2) (modified)
  •  VDS RSC 301 Cradle Assy
  •  VDS – Engine Mount Bracket
  •  VDS – Engine Mount Bracket (copy)
  •  VDS HC – 103 Carrier Sub Assy’s -1,-2,-3,-4
  •  VDS RSP – 103 Rear Plate Mounts
  •  VDS RSP – 101 Intermediate Plate
  •  VDS TR 101 Top Rear Rocker Sub-Assy
  •  VDS-Lola RDA – 0015 Layout Proposed Underbody/Radiator Duct Mod
  •  Hewland DGB Installation, DGB Gearbox, Full Size
  •  Hewland DG 300 Installation Drawing, DG 300 Inboard Brake
  •  Hewland DGB 200RS Mod to DGB 200 Gearbox
  •  Hewland 8K 484 Hole Positions Avail for Front Face FGB/VG/DGB
  •  Hewland DGB 200 DGB Layout & Parts List
  •  Hewland DGB Installation DGB Gearbox
  •  March – Side Plate
  •  Lockheed CP2261-412/-413 11.91” Dia. Ventilated Disc
  •  Lockheed -122RH/-123LH Ventilated Disc
  •  84 CanAm SCI – 1149 Axle Shaft

Technical Drawings & Templates:

  • VDS Nose exit ducting
  •  VDS Radiator duct entry
  •  VDS Radiator duct
  •  VDS Proposed radiator configuration
  •  VDS NACA duct dimensions
  •  VDS C-4-V #1 – #6
  •  VDS Untitled profile
  •  VDS Wheel hub dimensions
  •  VDS Wing end plate hole location dimensions
  •  March 847 C/A
  •  DGZ/DMS Input shaft bearing layout
  •  VDS Lever arm deflection graph
  •  VDS Torsion test result graph
  •  VDS Folder containing 84 construction paper fabrication templates of various ponents

Manufacturing Jigs & Tooling

  • Air box screen template, wood
  •  Nose carrier jig
  •  Engine and transmission under tray templates
  •  Lower suspension arm tap, machined heim joint
  •  Tap for suspension heim joints
  •  Venturi template, degreed, aluminum
  •  Rear engine plate template, aluminum
  •  Standard horizontal exhaust pattern to Chevrolet triangulated exhaust pattern template
  •  Engine plate support bracket template, bottom
  •  Bosch ignition package mount plate template
  •  ATL front vent template
  •  Oil cooler template, center to center of holes
  •  Seat mounting bracket template
  •  Rear bulkhead X brace jig
  •  Rear support bar jig
  •  Venturi contour template
  •  Seat belt mount template
  •  Dash template, wood (x2)
  •  Dash template, aluminum
  •  Oil Cooler gurney lip template
  •  Starter adapter plate template
  •  Contour blocks, wood, for aluminum shaping, 2 angular, 1 round
  •  Exhaust shield templates w/3 wooden contour forms
  •  Rear wing mounting template
  •  Side Pod honeycomb support panel templates, 2 aluminum, 1 wood
  •  Assorted Side pod honeycomb support panel mounting plate templates
  •  Rear rocker plate template
  •  Front engine plate template
  •  Rear exhaust heat shield templates, x2
  •  Wing plate templates, x4
  •  Bump steer fixture template
  •  Master cut off switch box template
  •  Early VDS jigs, x7
  •  Upright tool bolt sleeves, machined
  •  Splitter profile templates
  •  Mock up shock bars
  •  48”x56” Hexcel bonded structure, new
  •  45”x26” Hexcel bonded structure, new
  •  Assorted hexagonal reinforcement material panels for bodywork fabrication

Lola 530/532 Parts and Components Inventory (Acquired 2002)

  •  1 each Lola 530/532 monocoque tub, new
  •  1 each Lola 530/532 chassis stand, w/ front & rear plate jigs
  •  2 each Fuel inlet stanchions, aluminum
  •  2 each Uprights, #D333-2014, front, magnesium, bare
  •  2 each Uprights, rear, fabricated w/heat normalization fixtures
  •  3 each Steering links, black anodized
  •  2 each Upright bearing distance spacers
  •  1 each Transmission bobbin spacer w/seal
  •  1 each Ackerman steering mount, magnesium, front
  •  1 each Spherical joint
  •  6 each Aluminum spacers
  •  14 each Wheel drive pins
  •  4 each Hubs, magnesium, w/bearings and races
  •  4 each Rocker arm pivot trunnions
  •  1 pair Ackerman steering mount, anodized aluminum
  •  4 each Steering rack mounts, anodized aluminum
  •  2 each Fuel receptacle flanges
  •  2 each Pedal pads
  •  1 each Brake bias bar & link set
  •  1 each Shifter bulkhead bearing support, plated
  •  2 each Upper shock retainers
  •  2 each Halfshafts, U-joint to CV
  •  Assort Wheel hardware
  •  Assort Mock up hardware
  •  1 each Oil cooler support bracket
  •  1 each Exhaust mounting bracket
  •  2 each Locating dowels, large
  •  1 each Rear chassis X brace
  •  2 each Rocker arms, front suspension
  •  2 pair Adjustable sway bars, front and rear, 1 set plated – new, 1 set plated – used
  •  2 each Z bar braces for rear area
  •  2 each V bar braces for rear area, narrow
  •  4 each V bar for rear area, plated
  •  1 each Transmission/wing mount cover plate, #c333-13035
  •  4 each Front chassis reinforcement bars, plated
  •  1 set Steering shaft w/4 support bars, #2DGA-30
  •  2 each Front A-arms, complete, #2DGA-28
  •  2 each Front A-arms, bare
  •  1 each Wing link
  •  4 each Rear A-arms, bare, DGA-39
  •  2 each Fuel inlet flanges
  •  1 each Steering rack, disassembled
  •  2 each Dash plate
  •  4 each Bell housing to suspension mounting plates
  •  1 each Triangular mounting plate
  •  5 each Swirl pot mounting brackets
  •  Assort Suspension mock up assembly parts
  •  1 each Catch tank, aluminum
  •  Assort Steering rack joints
  •  1 each Spherical bearing holder for shift linkage
  •  2 each Check valve balls w/springs
  •  Assort Grooved spacers
  •  Assort Rear rocker arm seats
  •  1 each Plumbing “T”, aluminum
  •  1 pair Body support bars & panels
  •  1 pair Steering links, plated
  •  1 each Dead pedal support bar
  •  1 each Dead pedal
  •  1 each Cooler mounting bracket
  •  1 each Front hub retainer washer
  •  2 each Hub spindles w/nuts
  •  6 each Internal clutch sliders
  •  4 each Tapered body dowels
  •  3 each Aluminum tube spacers
  •  8 each Threaded suspension heim bungs
  •  26 each Machined suspension heim pivot for rockers
  •  4 each Rear wing mounting plates, 2DGA-27
  •  1 each Oil Tank, 2DGA-5
  •  2 each Radiators
  •  2 each Rotors w/hats
  •  1 each Radiator support panel
  •  2 each Cooling system tubular manifolds
  •  2 each Fuel cross over manifolds
  •  2 sets Springs 6S900, 631100
  •  1 each Steering link w/U-joints
  •  1 each Black painted aluminum mounting plates
  •  Assort Small hardware & valve stems
  •  1 each Transmission/Rocker mounting plate
  •  1 set Exhaust headers, #2DG-13
  •  1 set Brake duct molds
  •  1 each Fuel valve for ball & spring
  •  1 set Rear A-arms, bare
  •  1 set Rear A-arms, early style
  •  1 each Late style A-arm, damaged
  •  4 each A-arm distance parts
  •  2 each Lockheed Calipers, #CP2561-102C
  •  2 each Lockheed calipers, #CP2667-115
  •  1 each Dead pedal, black
  •  4 each Rear frame support tubes, 2 new, 2 early
  •  2 each Plated frame supports, fabricated
  •  4 each Trans side plate to bell housing plate fabricated fixtures, 2 plated, 2 black
  • 3 each Sway bar clevis type tubes
  •  1 each Brake pedal bar w/bushings
  •  1 each Clutch pedal bar
  •  2 sets Rear chassis to rocker pivot plate bars
  •  1 each Fuel inlet stanchion
  •  1 each Fuel check valve for ball & spring
  •  2 each Fuel spring loaded valve inlets
  •  1 each Wing adjuster rod
  • 3 each Radiator inlet panels
  • 4 each Nose locating panels
  •  1 each Battery box
  •  1 set Engine to chassis plates
  •  2 each Trans gear cover spacers
  •  4 each Triangular wing mounting plates, early style
  •  4 each Bottom wing mounting plates, early style
  •  1 each Wing Mount Assembly

Blue Prints:

  •  VDS WM –I 530 Lola Wing Mount Scheme
  • VDS WM – I 530 Lola Wing Mount Scheme (modified)